• Explosion Protection to
EN,IEC
• Can be used in
Zone 1,2,21,22
Class I
Division 2
Groups A, B, C, D
• Ex e enclosure with explosion-proof components inside.
• Safety interlock between enclosure and diffuser, switches off on opening.
• Bult-in electronic ballast, power factor≥0.95.
• Emergency unit with protections against overcharge and over discharge.
• End of lamp life (EOL) rectification effect protection.
| Specification | |
|---|---|
| Global (IECEx) | IECEx CQM 07.0007 |
| Gas and dust | Ex d e q IIC T4 Gb; Ex t IIIC T80℃ Db IP66 |
| Europe (ATEX) | LCIE 12 ATEX 3045X |
| Gas and dust |  II 2 G Ex d e q IIC T4 Gb |
| II 2 D Ex t IIIC T80℃ Db IP66 |
|
| Certificates | IECEx; ATEX; CU-TR |
| Conformity to standards | EN; IEC |
| Degree of protection | IP66,IP67(optional) |
| Ambient temperature | -20℃~+55℃ |
| Data | |
|---|---|
| Material | GRP, stands 7J impact, corrosion-proof |
| Weight | 6.7~12.75kg |
| Dimensions | 1380x222x154mm |
| Lamp specification | T8 tube |
| Lamp power (W) | 36W（18W） x 2； 36W（18W） x 1 |
| Emergency power (W) | 36W（18W） x 1 |
| Emergency starting time | 0.3s |
| Charging time | 24h |
| Emergency lighting time | 120/180 Mins |
| Rated voltage | 96~254V AC 50/60Hz |
| Rated luminous flux | 1300~6500lm |
| Terminal | 3 x 1.5~4mm²(L+N+PE) |
| Cable entries | 4 |
| Available cable outer diameter | Φ9~Φ16 (mm) |
